317L SS Forged Socket weld 90deg. Elbow, SS 317L Socket Weld Cross, SS UNS S31703 Socketweld Coupling Exporter, SS 317L Socket weld Pipe Elbow, SS WERKSTOFF NR. 1.4438 Socketweld Tee Exporter.

ASME SA182M SS 317L Socket weld Tee, Stainless Steel 317L Socket Weld Fittings, ASTM A182 Stainless Steel 317L Socket weld Elbow, 317L SS Socket weld Cap Manufacturer and Manufacturers in Mumbai, India.

Metal ministry inc. is leading Manufacturer of SS 317L Forged Socket Weld , which is provided by the strain associated with the stress – induced transformation and the high work – hardening rate of the martensitic product. The abrasion resistance of Stainless Steel 317L Forged Socket Weld Elbow was shown to be superior to that of mild steel.

Stainless Steel 317L Socketweld Fittings

The abrasive – corrosive properties of Stainless Steel 317L Forged Socket Weld Tee are very much superior to those of most proprietary abrasion – resistant alloys. Stainless Steel 317L Forged Socket Weld Cap appear to have the best overall abrasion resistance within the stainless steel group and under slow rates of strain their dry abrasion resistance is superior to those of typical abrasion – resistant alloys. Such abrasion resistance coupled with toughness and good corrosion resistance would clearly allow these Stainless Steel 317L Forged Socket Weld Coupling to compete successfully in many situations involving abrasive – corrosive wear. The optimum Stainless Steel 317L Forged Socket Weld Cross would appear to be either an inexpensive metastable austenitic grade or a duplex stainless steel consisting of a fine – grained mixture of ferrite and unstable austenite. This proposal in Stainless Steel 317L Forged Socket Weld Union is consistent with the effects which prior cold work and speed of abrasion have on the wear properties and the X-ray diffraction and electron microscopy examinations of the abraded surfaces.


Types of Stainless Steel 317L Socketweld Fittings
Stainless Steel 317L Threaded Elbow SS 317L 45 Degree Threaded Elbow
317L SS 90 Degree Forged Threaded Elbow
317L Stainless Steel 45 Degree Forged Elbow
SS UNS S31703 45 Degree Forged Elbow
SS WERKSTOFF NR. 1.4438 45 Degree Elbow
ASME SA182 317L 90 Degree Forged Threaded Elbow
Stainless Steel 317L Threaded Tee SS 317L Threaded Tee
317L SS Forged Tee
317L Stainless Steel Forged Threaded Tee
SS UNS S31703 Threaded Tee
SS WERKSTOFF NR. 1.4438 Forged Tee
ASTM A182 Stainless Steel 317L Threaded Tee
Stainless Steel 317L Threaded Cross SS 317L Threaded Cross
317L SS Forged Threaded Cross
317L Stainless Steel Threaded Cross
SS UNS S31703 Forged Threaded Cross
SS WERKSTOFF NR. 1.4438 Threaded Cross
ASTM A182 317L Stainless Steel Threaded Cross
Stainless Steel 317L Threaded Cap SS 317L Threaded Cap
317L SS Forged Threaded Cap
317L Stainless Steel Threaded Cap
SS UNS S31703 Forged Threaded Cap
SS WERKSTOFF NR. 1.4438 Threaded Cap
ASME SA182 317L Stainless Steel Forged Threaded Cap
Stainless Steel 317L Threaded Coupling SS 317L Threaded Coupling
317L SS Threaded Coupling
Stainless Steel 317L Threaded Coupling
SS UNS S31703 Threaded Coupling
SS WERKSTOFF NR. 1.4438 Threaded Coupling
ASME 16.11 317L Stainless Steel Threaded Coupling
Stainless Steel 317L Threaded Union SS 317L Threaded Union
317L SS Forged Threaded Union
317L Stainless Steel Threaded Union
SS UNS S31703 Forged Union
SS WERKSTOFF NR. 1.4438 Threaded Union
MSS SP-79 317L Stainless Steel Forged Union
Stainless Steel 317L Threaded Bushing SS 317L Threaded Bushing
317L SS Forged Threaded Bushing
317L Stainless Steel Threaded Bushing
SS UNS S31703 Forged Bushing
SS WERKSTOFF NR. 1.4438 Threaded Bushing
ASTM A182 317L Stainless Steel Threaded Bushing
Stainless Steel 317L Threaded Plug SS 317L Forged Threaded Plug
317L SS Threaded Plug
317L Stainless Steel Forged Plug
SS UNS S31703 Threaded Plug
SS WERKSTOFF NR. 1.4438 Threaded Plug
ASTM A182 TP 317L Stainless Steel Threaded Plug
Stainless Steel 317L Threaded Hex Plug SS 317L Hex Plug
317L SS Forged Hex Plug
317L Stainless Steel Threaded Hex Plug
SS UNS S31703 Hex Plug
SS WERKSTOFF NR. 1.4438 Forged Hex Plug
ASTM A182 317L Stainless Steel Threaded Hex Plug
Stainless Steel 317L Hexagonal Plug SS 317L Hexagonal Plug
317L SS Forged Hexagonal Plug
317L Stainless Steel Hexagonal Plug
SS UNS S31703 Forged Hexagonal Plug
SS WERKSTOFF NR. 1.4438 Hexagonal Plug
ASME SA182 317L Stainless Steel Forged Hexagonal Plug
Stainless Steel 317L Threaded Pipe Nipple SS 317L Threaded Pipe Nipple
317L SS Forged Pipe Nipple
317L Stainless Steel Threaded Pipe Nipple
SS UNS S31703 Forged Pipe Nipple
SS WERKSTOFF NR. 1.4438 Threaded Pipe Nipple
ASME 16.11 317L Stainless Steel Threaded Pipe Nipple

Standards Specification of Stainless Steel 317L Socketweld Fittings
Specifications ASTM A182 & ASME SA182
Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size 1/8" NB to 4" NB (Socketweld & Screwed-Threaded)
Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type Socketweld Fittings

Chemical Composition of Stainless Steel 317L Socketweld Fittings
Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

Mechanical Properties of Stainless Steel 317L Socketweld Fittings
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades of Stainless Steel 317L Socketweld Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4

Destination of Stainless Steel 317L Socketweld Fittings


Metal ministry Inc. have Supplies Stainless Steel 317L Socketweld Fittings to Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Bihar Sharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Leh Ladakh, Ludhiana, Madurai, Mehsana, Mangalore, Mangalore, Mira Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai Virar, Vellore, Chennai, Cochin, Vishakhapatnam


Metal ministry Inc. have exportes to Afghanistan, Albania, Algeria, Andorra, Angola, Antigua And Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas The, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Bhutan, Bolivia, Bosnia And Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Verde, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Democratic Republic Of The, Congo, Republic Of The, Costa Rica, Cote, Croatia, Cuba, Curacao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia The Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea Bissau, Guyana, Haiti, Holy See, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Korea, North, Korea, South, Kosovo, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, Netherlands Antilles, New Zealand, Nicaragua, Niger, Nigeria, North Korea, Norway, Oman, Pakistan, Palau, Palestinian Territories, Panama, Papua New Guinea, Paraguay, Peru, San Marino, Philippines, Poland, Portugal,Qatar, Romania, Russia, Rwanda, Saint Kitts And Nevis, Saint Lucia, Saint Vincent And The Grenadines, Samoa, Sao Tome And Principe, Saudi Arabia, Senegal, Serbia, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Timor Leste, Togo, Tonga, Trinidad And Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Usa, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe countries.


If you have any enquiries related to Stainless Steel 317L Socketweld Fittings, feel free to Call/ Whatsall on :-
+919892171042       Enquiry@metalministry.in


OUR SUMMARY:
Reviewer
Metal ministry Inc.
Review Date
Reviewed Product
Stainless Steel 317L Socketweld Fittings
Author Rating
5Alloy 400 Bolts ManufacturerAlloy 400 Bolts ManufacturerAlloy 400 Bolts ManufacturerAlloy 400 Bolts ManufacturerAlloy 400 Bolts Manufacturer